Large Mediterranean villa with terraced garden, pool house and a discreet Wi-Fi access point beneath a pergola
Guides

Poor Wi-Fi in a large villa: the solutions that actually work

An internet router, however recent, is not designed to cover 300 m², two floors, a terrace and a pool house. The solution is not yet another repeater, but a proper network.

‘The Wi-Fi doesn’t reach the bedrooms’, ‘the TV cuts out during the film’, ‘the cameras disconnect at night’: this is the most common request we receive in villas around the Gulf. In the vast majority of cases, the internet subscription is not to blame. It is the network inside the house that was never designed for its size.

Why an internet router’s Wi-Fi is not enough

  • The walls: stone, concrete, thick load-bearing walls and floor slabs heavily obstruct the signal.
  • The floor area: a router is designed for a standard home, not for several hundred square metres over two or three levels.
  • The outdoors: terrace, pool, pool house and garden are far from the router, often separated by coated glazing that blocks the signal.
  • The number of devices: TVs, speakers, cameras, alarm, home automation, guests’ phones and computers… a connected villa quickly reaches several dozen devices.

What does not really work

  • Stacking repeaters: each repeater uses up part of the bandwidth and adds another point of weakness.
  • Wireless ‘mesh’ kits: useful in an average-sized house, they quickly reach their limits when walls are thick and distances long.
  • Changing your subscription: a faster connection coming in is of no use if it does not reach the rooms.

What works: a network designed like a hotel’s

  1. A network core in a technical rack: professional router and switches, UPS.
  2. Wired Wi-Fi access points, powered over the network cable (PoE), mounted on the ceiling or wall: one per zone, outdoors included.
  3. A single network name across the whole property, with automatic handover from one access point to the next.
  4. Separate networks: one for the family, one for guests, one for devices (cameras, home automation). It is safer and more stable.
  5. Cable for anything that stays put: TVs, consoles, TV boxes and home automation screens are better on a wired connection.
  6. Remote monitoring: the integrator can see if an access point goes down and step in before you notice anything at all.

And if the internet connection itself is weak?

In some parts of the hills around the Gulf, fibre is not yet available or speeds are limited. Other connection options then exist, such as Starlink or 4G/5G, which can be combined with the main connection to switch over automatically in the event of an outage. See our guide Internet for a remote villa.

Our method at Home-Tech

We begin with an on-site survey: measuring the incoming speed, mapping coverage room by room, locating existing cables. We then propose an access point plan and, if needed, several levels of equipment. After installation, a maintenance contract allows the network to be monitored remotely. Request a diagnosis.

FAQ

Your questions

Are Wi-Fi repeaters enough?

They can help in an apartment, rarely in a villa. A repeater halves the throughput and adds instability. Access points cabled back to a central network deliver consistent speeds and seamless roaming from one point to the next.

Can Wi-Fi be improved without building work?

Often, yes, by reusing existing cables or running through suspended ceilings and service ducts. We always start with an on-site survey in order to propose the least invasive solution.

My internet is slow: is it the Wi-Fi or the subscription?

Both need to be measured: the speed arriving at the router, then the speed in each room. If the router receives a good speed but the rooms do not, it is the in-house network that needs rethinking.

Let's talk about your project

Two minutes to describe your needs: we come back to you with initial advice. Free quotation.

CallYour project